We have been making improvements to the experience and performance of this page!
13 Results filtered by...
Filter
Skip to the results
Tags > cities Clear All

Government
Map
Boundaries of 2014 Census Designated Places in San Mateo County. This data includes boundaries for: Atherton, Belmont, Brisbane, Broadmoor, Burlingame, Colma, Daly City, East Palo Alto, El Granada, Emerald Lake Hills, Foster City, Half Moon Bay, Highlands-Baywood Park, Hillsborough, Ladera, La Honda, Loma Mar, Menlo Park, Millbrae, Montara, Moss Beach, North Fair Oaks, Pacifica, Pescadero, Portola Valley, Redwood City, San Bruno, San Carlos, San Mateo, South San Francisco, West Menlo Park, and Woodside.
More information about Census Designated Places can be found on the US Census site: https://www.census.gov/geo/reference/gtc/gtc_place.html
Tags boundaries census cities towns
Updated
April 24 2024
Views
6,429

Government
Map
Boundaries of the spheres of influence of cities in San Mateo County. A sphere of influence is a planning boundary outside of an agency’s legal boundary (such as the city limit line) that designates the agency’s probable future boundary and service area. Data includes the names of areas located within the sphere of influence.
Tags cities jurisdictions planning soi
Updated
February 16 2022
Views
233

Business
Federated data Data Provided by datahub.smcgov.org
Dataset
Employment and unemployment data by city for places in San Mateo County. CDP is "Census Designated Place" - a recognized community that was unincorporated at the time of the 2000 Census.
1) Data may not add due to rounding. All unemployment rates shown are calculated on unrounded data.
2) These data are not seasonally adjusted.
Methodology: Monthly city and CDP labor force data are derived by multiplying current estimates of county employment and unemployment by the employment and unemployment shares (ratios) of each city and CDP at the time of the 2000 Census. Ratios for cities of 25,000 or more persons were developed from special tabulations based on household population only from the Bureau of Labor Statistics. For smaller cities and CDP, ratios were calculated from published census data.
City and CDP unrounded employment and unemployment are summed to get the labor force. The unemployment rate is calculated by dividing unemployment by the labor force. Then the labor force, employment, and unemployment are rounded.
This method assumes that the rates of change in employment and unemployment, since 2000, are exactly the same in each city and CDP as at the county level (i.e., that the shares are still accurate). If this assumption is not true for a specific city or CDP, then the estimates for that area may not represent the current economic conditions. Since this assumption is untested, caution should be employed when using these data.
Tags cities employment unemployment
API Docs
Updated
March 2 2021
Views
36

Government
Dataset
Boundaries of the spheres of influence of cities in San Mateo County. A sphere of influence is a planning boundary outside of an agency’s legal boundary (such as the city limit line) that designates the agency’s probable future boundary and service area. Data includes the names of areas located within the sphere of influence.
Tags cities jurisdictions planning soi
API Docs
Updated
January 10 2022
Views
195

Government
Dataset
Boundaries of 2014 Census Designated Places in San Mateo County. This data includes boundaries for: Atherton, Belmont, Brisbane, Broadmoor, Burlingame, Colma, Daly City, East Palo Alto, El Granada, Emerald Lake Hills, Foster City, Half Moon Bay, Highlands-Baywood Park, Hillsborough, Ladera, La Honda, Loma Mar, Menlo Park, Millbrae, Montara, Moss Beach, North Fair Oaks, Pacifica, Pescadero, Portola Valley, Redwood City, San Bruno, San Carlos, San Mateo, South San Francisco, West Menlo Park, and Woodside.
More information about Census Designated Places can be found on the US Census site: https://www.census.gov/geo/reference/gtc/gtc_place.html
Tags boundaries census cities towns
API Docs
Updated
April 10 2024
Views
127

Business
Federated data Data Provided by datahub.smcgov.org
Chart
Employment and unemployment data by city for places in San Mateo County. CDP is "Census Designated Place" - a recognized community that was unincorporated at the time of the 2000 Census.
1) Data may not add due to rounding. All unemployment rates shown are calculated on unrounded data.
2) These data are not seasonally adjusted.
Methodology: Monthly city and CDP labor force data are derived by multiplying current estimates of county employment and unemployment by the employment and unemployment shares (ratios) of each city and CDP at the time of the 2000 Census. Ratios for cities of 25,000 or more persons were developed from special tabulations based on household population only from the Bureau of Labor Statistics. For smaller cities and CDP, ratios were calculated from published census data.
City and CDP unrounded employment and unemployment are summed to get the labor force. The unemployment rate is calculated by dividing unemployment by the labor force. Then the labor force, employment, and unemployment are rounded.
This method assumes that the rates of change in employment and unemployment, since 2000, are exactly the same in each city and CDP as at the county level (i.e., that the shares are still accurate). If this assumption is not true for a specific city or CDP, then the estimates for that area may not represent the current economic conditions. Since this assumption is untested, caution should be employed when using these data.
Tags cities employment unemployment
Updated
March 2 2021
Views
0

Business
Federated data Data Provided by datahub.smcgov.org
Chart
Employment and unemployment data by city for places in San Mateo County. CDP is "Census Designated Place" - a recognized community that was unincorporated at the time of the 2000 Census.
1) Data may not add due to rounding. All unemployment rates shown are calculated on unrounded data.
2) These data are not seasonally adjusted.
Methodology: Monthly city and CDP labor force data are derived by multiplying current estimates of county employment and unemployment by the employment and unemployment shares (ratios) of each city and CDP at the time of the 2000 Census. Ratios for cities of 25,000 or more persons were developed from special tabulations based on household population only from the Bureau of Labor Statistics. For smaller cities and CDP, ratios were calculated from published census data.
City and CDP unrounded employment and unemployment are summed to get the labor force. The unemployment rate is calculated by dividing unemployment by the labor force. Then the labor force, employment, and unemployment are rounded.
This method assumes that the rates of change in employment and unemployment, since 2000, are exactly the same in each city and CDP as at the county level (i.e., that the shares are still accurate). If this assumption is not true for a specific city or CDP, then the estimates for that area may not represent the current economic conditions. Since this assumption is untested, caution should be employed when using these data.
Tags cities employment unemployment
Updated
March 2 2021
Views
0

Business
Federated data Data Provided by datahub.smcgov.org
Chart
Employment and unemployment data by city for places in San Mateo County. CDP is "Census Designated Place" - a recognized community that was unincorporated at the time of the 2000 Census.
1) Data may not add due to rounding. All unemployment rates shown are calculated on unrounded data.
2) These data are not seasonally adjusted.
Methodology: Monthly city and CDP labor force data are derived by multiplying current estimates of county employment and unemployment by the employment and unemployment shares (ratios) of each city and CDP at the time of the 2000 Census. Ratios for cities of 25,000 or more persons were developed from special tabulations based on household population only from the Bureau of Labor Statistics. For smaller cities and CDP, ratios were calculated from published census data.
City and CDP unrounded employment and unemployment are summed to get the labor force. The unemployment rate is calculated by dividing unemployment by the labor force. Then the labor force, employment, and unemployment are rounded.
This method assumes that the rates of change in employment and unemployment, since 2000, are exactly the same in each city and CDP as at the county level (i.e., that the shares are still accurate). If this assumption is not true for a specific city or CDP, then the estimates for that area may not represent the current economic conditions. Since this assumption is untested, caution should be employed when using these data.
Tags cities employment unemployment
Updated
March 2 2021
Views
0

COMMUNITY CREATED

Business
Federated data Data Provided by datahub.smcgov.org
Filtered View
Employment and unemployment data by city for places in San Mateo County. CDP is "Census Designated Place" - a recognized community that was unincorporated at the time of the 2000 Census.
1) Data may not add due to rounding. All unemployment rates shown are calculated on unrounded data.
2) These data are not seasonally adjusted.
Methodology: Monthly city and CDP labor force data are derived by multiplying current estimates of county employment and unemployment by the employment and unemployment shares (ratios) of each city and CDP at the time of the 2000 Census. Ratios for cities of 25,000 or more persons were developed from special tabulations based on household population only from the Bureau of Labor Statistics. For smaller cities and CDP, ratios were calculated from published census data.
City and CDP unrounded employment and unemployment are summed to get the labor force. The unemployment rate is calculated by dividing unemployment by the labor force. Then the labor force, employment, and unemployment are rounded.
This method assumes that the rates of change in employment and unemployment, since 2000, are exactly the same in each city and CDP as at the county level (i.e., that the shares are still accurate). If this assumption is not true for a specific city or CDP, then the estimates for that area may not represent the current economic conditions. Since this assumption is untested, caution should be employed when using these data.
Tags cities employment unemployment
API Docs
Updated
March 2 2021
Views
21

Business
Federated data Data Provided by datahub.smcgov.org
Chart
Employment and unemployment data by city for places in San Mateo County. CDP is "Census Designated Place" - a recognized community that was unincorporated at the time of the 2000 Census.
1) Data may not add due to rounding. All unemployment rates shown are calculated on unrounded data.
2) These data are not seasonally adjusted.
Methodology: Monthly city and CDP labor force data are derived by multiplying current estimates of county employment and unemployment by the employment and unemployment shares (ratios) of each city and CDP at the time of the 2000 Census. Ratios for cities of 25,000 or more persons were developed from special tabulations based on household population only from the Bureau of Labor Statistics. For smaller cities and CDP, ratios were calculated from published census data.
City and CDP unrounded employment and unemployment are summed to get the labor force. The unemployment rate is calculated by dividing unemployment by the labor force. Then the labor force, employment, and unemployment are rounded.
This method assumes that the rates of change in employment and unemployment, since 2000, are exactly the same in each city and CDP as at the county level (i.e., that the shares are still accurate). If this assumption is not true for a specific city or CDP, then the estimates for that area may not represent the current economic conditions. Since this assumption is untested, caution should be employed when using these data.
Tags cities employment unemployment
Updated
March 2 2021
Views
0